User Manual

Thermal Network Bullet Camera User Manual
14
IP address, you can connect the network camera via a router or connect it to
the WAN directly.
Connecting the network camera via a router
Steps:
1. Connect the network camera to the router.
2. Assign a LAN IP address, the subnet mask and the gateway. Refer to
2.1.2for detailed IP address configuration of the network camera.
3. Save the static IP in the router.
4. Set port mapping, e.g., 80, 8000, and 554 ports. The steps for port mapping
vary according to the different routers. Please call the router manufacturer
for assistance with port mapping.
Note: Refer to Appendix 2 for detailed information about port mapping.
5. Visit the network camera through a web browser or the client software over
the internet.
Figure 2-10 Accessing the Camera through Router with Static IP
Connecting the network camera with static IP directly
You can also save the static IP in the camera and directly connect it to the
internet without using a router. Refer to 2.1.2 for detailed IP address
configuration of the network camera.