User Manual

Thermal Network Bullet Camera User Manual
6
Software are all supported.
Activation via Web Browser
Steps:
1. Power on the camera, and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and click Enter
to enter the activation interface.
Notes:
The default IP address of the camera is 192.168.1.64.
The computer and the camera should belong to the same subnet.
For the camera enables the DHCP by default, you need to use the SADP
software to search the IP address.
Figure 2-3 Activation via Web Browser
3. Create a password and input the password into the password field.