User Manual

Thermal Network Bullet Camera User Manual
165
uses port 80, 8000 and 554. You can change these ports value with web
browser or client software.
Example:
When the cameras are connected to the same router, you can configure the
ports of a camera as 80, 8000, and 554 with IP address 192.168.1.23, and
the ports of another camera as 81, 8001, 555, 8201 with IP 192.168.1.24.
Refer to the steps as below:
Steps:
1. As the settings mentioned above, map the port 80, 8000, 554 and 8200 for
the network camera at 192.168.1.23
2. Map the port 81, 8001, 555 and 8201 for the network camera at
192.168.1.24.
3. Enable ALL or TCP protocols.
4. Check the Enable checkbox and click Save to save the settings.