User Manual

Thermal Network Bullet Camera User Manual
152
to unlock the memory card.
Remove the Lock
(1) Select the Lock Switch as OFF.
(2) Input the correct password in Password Settings text field.
(3) Click Save to save the settings.
4. Set the Arming Schedule and Linkage Method, if you want to receive a
notification when the health status of the memory card is anything other
than good. Refer to Task 2: Set the Arming Schedule for Motion Detection and
Task 3: Set the Linkage Method for Motion Detection in Section 9.1.1.
5. Click Save to save the settings.
10.5 Configuring Lite Storage
Purpose:
When there is no moving object in the monitoring scenario, the frame rate and
bitrate of the video stream can be reduced to lengthen the storage time of the
memory card.
Notes:
Lite storage function varies according to different camera models.
The video files recorded in lite storage mode will be played back in full
frame rate (25fps/30fps), and thus the playback process is speeded up to
the eye.
1. Enter the Lite Storage interface: