User Manual

Thermal Network Bullet Camera User Manual
151
Figure 10-11 R/W Lock Setting
Add a Lock
(1) Select the Lock Switch as ON.
(2) Input the password.
(3) Click Save to save the settings.
Unlock
(1) If you use the memory card on the camera that locks it, unlocking will
be done automatically and no unlocking procedures are required on the
part of users.
(2) If you use the memory card (with a lock) on a different camera, you can
go to HDD Management interface to unlock the memory card manually.
Select the memory card, and click the Unlock button shown next to the
Format button. Then input the correct password to unlock it.
Notes:
• The memory card can only be read and written in when it is
unlocked.
• If the camera, which adds a lock to a memory card, is restored to
the factory settings, you can go to the HDD Management interface