User Manual

Thermal Network Bullet Camera User Manual
147
Storage Management > Net HDD.
Figure 10-6 Add Network Disk
(2) Enter the IP address of the network disk, and enter the file path.
(3) Select the mounting type. NFS and SMB/CIFS are selectable. And you
can set the user name and password to guarantee the security if
SMB/CIFS is selected.
Note: Please refer to the NAS User Manual for creating the file path.
For your privacy and to better protect your system against security
risks, we strongly recommend the use of strong passwords for all
functions and network devices. The password should be something of
your own choosing (using a minimum of 8 characters, including at least
three of the following categories: upper case letters, lower case letters,
numbers and special characters) in order to increase the security of
your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
(4) Click Save to add the network disk.