User Manual

Thermal Network Bullet Camera User Manual
145
Figure 10-3 Capture Configuration
2. Go to Capture Schedule tab to configure the capture schedule by
click-and-drag the mouse on the time bar. You can copy the record
schedule to other days by clicking the green copy icon on the right of each
time bar.
3. Click Advanced to select stream type.
Figure 10-4 Advanced Setting of Capture Schedule
4. Click Save to save the settings.
5. Go to Capture Parameters tab to configure the capture parameters.
(1) Check the Enable Timing Snapshot checkbox to enable continuous
snapshot.
(2) Select the picture format, resolution, quality and capture interval.
(3) Check the Enable Event-triggered Snapshot checkbox to enable
event-triggered snapshot.
(4) Select the picture format, resolution, quality, capture interval, and
capture number.