User Manual

Thermal Network Bullet Camera User Manual
143
the Section 9.1.1.
Record Triggered by Alarm
If you select Alarm, the video will be recorded when the alarm is
triggered via the external alarm input channels.
Besides configuring the recording schedule, you have to set the Alarm
Type and check the checkbox of Trigger Channel in the Linkage Method
of Alarm Input Settings interface. For detailed information, please refer
to Section 9.1.3.
Record Triggered by Motion & Alarm
If you select Motion & Alarm, the video will be recorded when the
motion and alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 9.1.1.and Section 9.1.3 for detailed information.
Record Triggered by Motion | Alarm
If you select Motion | Alarm, the video will be recorded when the
external alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 9.1.1.and Section 9.1.3 for detailed information.
Record Triggered by Events
If you select Event, the video will be recorded if any of the events is