User Manual

Thermal Network Bullet Camera User Manual
137
Figure 9-25 Alarm Rule Settings (Line)
b) Set the Alarm Rule.
c) Set the Alarm Temperature, Pre-Alarm Temperature, and Tolerance
Temperature.
d) Set the Filtering Time.
e) Set the Pre-Alarm Output and Alarm Output with the connected
alarm sensor and alarm device.
Example: select Alarm Rule as Min. Temperature is Lower than, and
set the Alarm Temperature to 40 ° C, and the device alarms when the
minimum temperature is lower than 40 °C.
For Area Temperature Comparison:
Make sure you have enabled the areas for comparison.
a) Click Area's Temperature Comparison to enter the area
temperature comparison interface.