User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Live View
- Chapter 5 Network Camera Configuration
- Chapter 6 Network Settings
- Chapter 7 Video/Audio Settings
- Chapter 8 Image Settings
- Chapter 9 Event Settings
- Chapter 10 Storage Settings
- Chapter 11 Open Platform setting
- Chapter 12 Playback
- Chapter 13 Picture
- Appendix
Thermal Network Bullet Camera User Manual
133
Distance (m): The straight-line distance between the target and the
device.
Pre-Alarm: When the temperature of target exceeds the Pre-Alarm
Threshold, and this status keeps NOT shorter than the Filtering Time, it
triggers the Pre-Alarm.
Check the checkbox of Pre-Alarm Output to set link the pre-alarm with
the connected alarm device.
Alarm: When the temperature of target exceeds the Alarm Threshold,
and this status keeps NOT shorter than the Filtering Time, it triggers the
Alarm.
Check the checkbox of Alarm Output to set link the pre-alarm with the
connected alarm device.
4. Click Save.
Figure 9-22 Temperature Measurement Configuration