User Manual

Thermal Network Bullet Camera User Manual
130
Note: Before you use the temperature measurement function, enter
Configuration > System > Maintenance > VCA Resource Type to select
Temperature Measurement + Behavior Analysis as VCA Resource Type.
Steps:
1. Enter Configuration > Temperature Measurement > Basic Settings.
Figure 9-21 Basic Settings
2. Check the checkboxes of the interface to set the temperature
measurement configurations.
Enable Temperature Measurement: Check the checkbox to enable
temperature measurement function.
Enable Color-Temperature: Check the checkbox to display
temperature pallet in live view.
Display Temperature Info. on Stream: Check the checkbox to
display temperature information in live view.