User Manual

Thermal Network Bullet Camera User Manual
122
Figure 9-17 Calibration Verification
Note:
If the Auto Calibration failed, or the verified result turns bad, click Fig 1 to Fig 4 to examine
whether they are valid person/object in the figures or not. If so, refer to the Manual Calibration.
4. (Optional) Set the Manual Calibration.
a) Check Manual Calibration.
b) Select Fig 1.
Figure 9-18 Manual Calibration
c) Click and drag the vertical line until it fits the target.
d) Input the actual length of the calibration line.