User Manual

Thermal Network Bullet Camera User Manual
120
Configuration > Local Configuration > Rules to enable it.
Snapshot Setting: You can set the quality and resolution for the captured
picture.
Upload JPEG Image to Center: Check the checkbox to upload the captured
image to the surveillance center when a VCA alarm occurs.
Picture Quality: High, Medium and Low are selectable.
Picture Resolution: CIF, 4CIF, 720P, and 1080P are selectable.
9.3.2 Behavior Analysis Configuration
Perform the following steps to three-dimensionally measure and quantize the
image from the camera, and then calculate the size of every target. The VCA
detection will be more accurate if the camera calibration is configured.
Before you start:
Make sure that we have known the actual height of the person in the scene.
Steps:
1. Configure the display information and snapshot settings.
2. Set the Auto Calibration.
a) Check the checkbox of Camera Calibration to enable this function.
b) Make sure only one person appears in the live view, and input the
person's height in the Target Height text field.
c) Click to start auto calibration.
Notes:
Make sure there is no moving objects in the view except for the person.