User Manual

Thermal Network Bullet Camera User Manual
110
for motion detection Refer to Task 2: Set the Arming Schedule for Motion
Detection in Section 9.1.1.
5. You can copy the settings to other alarm outputs.
6. Click Save to save the settings.
9.1.5 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP
address conflicted and illegal login to the cameras.
Steps:
1. Enter the Exception Settings interface: Configuration > Event > Basic
Event > Exception.
2. Check the checkbox to set the actions taken for the Exception alarm. Refer
to Task 3: Set the Linkage Method for Motion Detection in 9.1.1for detailed
steps.
Figure 9-10 Exception Settings
3. Click Save to save the settings.