User Manual

Thermal Network Bullet Camera User Manual
107
for motion detection. Refer to Task 2: Set the Arming Schedule for Motion
Detection in Section 9.1.1.
5. Check the checkbox to select the linkage method taken for the video
tampering. Audible warning, notify surveillance center, send email and
trigger alarm output are selectable. Please refer to Task 3: Set the Linkage
Method for Motion Detection in Section 9.1.1.
6. Click Save to save the settings.
9.1.3 Configuring Alarm Input
Steps:
1. Enter the Alarm Input Settings interface: Configuration > Event > Basic
Event > Alarm Input.
2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed). Edit the name to set a name
for the alarm input (optional).