User Manual

Thermal Network Bullet Camera User Manual
102
have the audio output.
Notify Surveillance Center
Send an exception or alarm signal to remote management software when
an event occurs.
Send Email
Send an email with alarm information to a user or users when an event
occurs.
Note: To send the Email when an event occurs, please refer to 6.2.3to
complete Email setup in advance.
Upload to FTP/Memory Card/NAS
Capture the image when an alarm is triggered and upload the picture to a
FTP server.
Notes:
● Set the FTP address and the remote FTP server first. Refer to 6.2.2for
detailed information.
● Go to Configuration > Storage > Schedule Settings> Capture > Capture
Parameters page, enable the event-triggered snapshot, and set the
capture interval and capture number.
● The captured image can also be uploaded to the available SD card or
network disk.
Trigger Channel
The video will be recorded when the motion is detected. You have to set