User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Live View
- Chapter 5 Network Camera Configuration
- Chapter 6 Network Settings
- Chapter 7 Video/Audio Settings
- Chapter 8 Image Settings
- Chapter 9 Event Settings
- Chapter 10 Storage Settings
- Chapter 11 Open Platform setting
- Chapter 12 Playback
- Chapter 13 Picture
- Appendix
Thermal Network Bullet Camera User Manual
95
1. Enter the DPC Settings interface: Configuration > Image > DPC
Figure 8-6 Defective Pixel Correction
2. Select the mode. The following takes manual mode as an example.
3. Click on the image to select the defective pixel. The cursor on the image
will move to the clicked position. You can click to slightly adjust
the cursor position.
4. Click to start correction.
5. Click to cancel the correction, or click to save.
8.6 Configuring VCA Rule Display
Purpose: