User Manual

Thermal Network Bullet Camera User Manual
89
different temperature section.
• Check Above (be colored), and set the temperature, the objects in the
scene whose temperature is above the value will be colored in red (by
default).
• Check Between (be colored), and set the temperature, the objects in
the scene whose temperature is between the two values will be
colored in sienna (by default).
• Check Below (be colored), and set the temperature, the objects in the
scene whose temperature is below the value will be colored in green
(by default).
DDE: The DDE (Digital Detail Enhancement) can adjust the details of
the image. And you can set it to OFF or Normal mode. And DDE Level
can be adjusted from 1 to 100 when in normal mode.
Brightness Sudden Change: (Only works with Behavior Analysis VCA
Resource) When the brightness of target and the background is hugely
different (the temperature difference of target and background is huge),
the system reduces the difference for viewing.
Regional Image Enhancement (optional): You can select the desired
area of image to show a red rectangle, in which the coding quality will
be improved and the image will be more detailed and clear.
Select up, down, left, right, center_50%, center_70% to show a red
rectangle, image will be enhanced in this area.