Quick Start Guide

[19]
Camera
Switch/ Router
Align the snap and notch.
i. Insert
⑤ into
④ .
ii. Secure
⑥ with
④ .
Water-proof Accessory Installation
Steps:
1. Feed the plugless network cable ⑦ through the lock nut ⑥,
waterproof rubber gasket ⑤ (rubber gasket inset ridge must face
waterproof endcap), and the water-proof endcap ④ in order.
2. Crimp an RJ-45 network plug ③ onto the end of the cable, taking
care to insert the twisted pairs of wires in correct order.