Quick Start Guide

[16]
4. Fix the bullet camera to the installation surface with the supplied
screws, as shown in Figure 2-15.
Wall Mounting
Ceilling Mounting
Install the Bracket onto the Wall
5. Adjust the camera to the optimal surveillance angle.
Bracket type I:
1) Loosen the pan adjusting screw to adjust panning position [0°
to 360°]. Tighten the screw.
2) Loosen the tile adjusting screw to adjust the tilting position [0°
to 100°]. Tighten the screw.
3) Loosen the rotation adjusting screw to adjust the rotation
position [0° to 360°]. Tighten the screw.
Pan Range
[0° to 360°]
2
3
1
Tilt Range
[0° to 100°]
Rotation Range
[0° to 360°]
3-axis Adjustment