Quick Start Guide

[14]
1. Attach the drill template (supplied) to the place where you want
to fix the camera, and then drill the screw holes in the ceiling/wall
according to the drill template.
2. (Optional) If you want to route cables through the installation
surface, drill a cable hole according to the drill template.
Otherwise, skip the step if you route the cable via the side
opening.
Φ5mm (0.20″)
Φ36mm (1.42″)
Φ88.5mm (3.48″)
Drill Template (Type II Camera)
3. (Optional) Fix the camera to the junction box.
1) Attach the drill template (supplied) to the place where you
want to fix the junction box, and then drill four holes in the
ceiling/wall according to the drill template.
2) (Optional) If you want to route cables through the installation
surface, drill a cable hole according to the drill template.
Otherwise, skip the step if you route the cable via the side
opening.