Quick Start Guide

[12]
3. Attach the drill template (supplied) to the place where you want
to fix the camera, and then drill four screw holes (recommended
depth: 40mm) in the ceiling/wall according to the drill template.
4. Drill a cable hole according to the A mark of the drill template.
Ф10 mm
(0.39'')
Ф24 mm
(0.94'')
Drill Template (Type I Camera)
5. Align the hole of drill template with the screw hole of the junction
box base to place the junction box onto the wall.
6. Route the screw through the sealing ring, and fix the junction box
base on the wall with the screws.
Sealing Ring
Screw
Installing Junction Box Base