User Manual

Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual
23
Or you can place the mouse on the presets interface, and call the preset by typing
the preset No. to call the corresponding presets.
Figure 4-5 Calling a Preset
4.4.3 Setting/Calling a Patrol
Note:
No less than 2 presets have to be configured before you set a patrol.
Steps:
1. Click to enter the patrol configuration interface.
2. Select a path No., and click to add the configured presets.
3. Select the preset, and input the patrol duration and patrol speed.
4. Click OK to save the first preset.
5. Follow the steps above to add the other presets.
Figure 4-6 Add Patrol Path
6. Click OK to save a patrol.
7. Click to start the patrol, and click to stop it.