User Manual

Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual
105
Fig 4 to examine whether they are valid person/object in the figures or
not. If so, refer to the Manual Calibration.
 TASK 2: Manual Calibration
Steps:
1. Check Manual Calibration.
2. Select Fig 1.
Figure 9-17 Manual Calibration (1)
3. Click and drag the vertical line until it fits the target.
4. Input the actual length of the calibration line.
5. (Optional) you can click × to delete the calibration line.
6. When the √ appears, select Fig 2 to 4 and repeat step 3.