User Manual

Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual
102
Figure 9-15 Basic Settings
Display information includes the display on picture and display on stream.
Display VCA info. on Stream: The green frames will be displayed on the target if
in a live view or playback.
Display Trajectory: Check to enable the trajectory display. The target's moving
trajectory will be shown in the live view.
Target Marking Color: There will be a frame on the target. Enable this function
to show the frame color of human as orange, show the frame color of vehicle as
purple.
Trajectory Display Duration: Duration is adjustable when you enable the
trajectory display: 5s, 10s, 20s, 30s are selectable. The system only shows the
trajectory of selected duration.
Display Target info. on Alarm Picture: There will be a frame on the target on the
uploaded alarm picture if the checkbox is checked.
Display Rule info. on Alarm Picture: The captured target and the configured area
will be framed on the alarm picture.
Note: Make sure the rules are enabled in your local settings. Go to