User Manual

Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual
39
(1) Click the Add to add an IP.
(2) Input the IP Adreess.
Figure 5-17 Add an IP
(3) Click the OK to finish adding.
 Modify an IP Address
Steps:
(1) Left-click an IP address from filter list and click Modify.
(2) Modify the IP address in the text filed.
Figure 5-18 Modify an IP
(3) Click the OK to finish modifying.
 Delete an IP Address or IP Addresses.
Select the IP address(es) and click Delete.
5. Click Save to save the settings.
5.4.3 Security Service
To enable the remote login, and improve the data communication security, the
camera provides the security service for better user experience.
Steps:
1. Enter the security service configuration interface: Configuration > System >
Security > Security Service.