User Manual

Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual
38
Figure 5-15 RTSP / WEB Authentication
2. Select the RTSP /WEB Authentication type digest or digest/basic in the
drop-down list.
3. Click Save to save the settings.
5.4.2 IP Address Filter
Purpose:
This function makes it possible for access control.
Steps:
1. Enter the IP Address Filter interface: Configuration > System > Security > IP
Address Filter
Figure 5-16 IP Address Filter Interface
2. Check the checkbox of Enable IP Address Filter.
3. Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed
are selectable.
4. Set the IP Address Filter list.
 Add an IP Address
Steps: