User Manual

Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual
5
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select the inactive device.
Select inactive device.
Input and confirm
password.
Figure 2-4 SADP Interface
Note:
The SADP software supports activating the camera in batch. Refer to the user manual
of SADP software for details.
3. Create a password and input the password in the password field, and confirm the
password.
STRONG PASSWORD RECOMMENDED– We highly recommend
you create a strong password of your own choosing (using a
minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your
product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password
monthly or weekly can better protect your product.
Note: