User Manual

Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual
121
Chapter 10 Storage Settings
Before you start:
To configure record settings, please make sure that you have the network storage
device or local storage device configured.
10.1 Configuring Record Schedule
Purpose:
There are two kinds of recording for the cameras: manual recording and scheduled
recording. In this section, you can follow the instructions to configure the scheduled
recording. By default, the record files of scheduled recording are stored in the local
storage or in the network disk.
Steps:
1. Enter the Record Schedule Settings interface: Configuration > Storage > Schedule
Settings > Record Schedule.
Figure 10-1 Recording Schedule Interface
2. Check the checkbox of Enable to enable scheduled recording.