User Manual

Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual
118
Figure 9-26 Alarm Rule Settings (Line)
b) Set the Alarm Rule.
c) Set the Alarm Temperature, Pre-Alarm Temperature, and Tolerance
Temperature.
d) Set the Filtering Time.
e) Set the Pre-Alarm Output and Alarm Output with the connected alarm
sensor and alarm device.
Example: select Alarm Rule as Min. Temperature is Lower than, and set the
Alarm Temperature to 40 °C, and the device alarms when the minimum
temperature is lower than 40 °C.
For Area Temperature Comparison:
Make sure you have enabled the areas for comparison.
a) Click Area's Temperature Comparison to enter the area temperature
comparison interface.
b) Select the areas.