User Manual

Thermal & Optical Bi-spectrum Network Bullet / Turret Camera User Manual
98
sensitivity and threshold for sound steep drop.
Notes:
 Sensitivity: Range [1-100], the smaller the value is, the more severe the
change should be to trigger the detection.
 Sound Intensity Threshold: Range [1-100], it can filter the sound in the
environment, the louder the environment sound, the higher the value
should be. You can adjust it according to the real environment.
 You can view the real-time volume of the sound on the interface.
5. Click Arming Schedule to set the arming schedule. Refer to Task 2 Set the
Arming Schedule for Motion Detection in Section 9.1.1 for detailed steps.
6. Click Linkage Method and select the linkage methods for audio exception,
including Notify Surveillance Center, Send Email, Upload to FTP/Memory
Card/NAS, Trigger Channel for recording and Trigger Alarm Output.
7. Click Save to save the settings.
9.2.2 Configuring Dynamic Fire Source Detection
Purpose:
When you enable this function and fire source is detected, the alarm actions will be
triggered. You can set different detection mode, fire source zoom mode, and so on.
Steps:
1. Enter Configuration > System > Maintenance > VCA Resource Type to select
Dynamic Fire Source Detection as VCA Resource Type.
2. Enter Configuration > Event > Smart Event > Dynamic Fire Source Detection.