User Manual

User Manual of Network Positioning System
© Hikvision
82
4. Click Add to add a new ONVIF user. Set the user name and password, and confirm the
password. You can set the user as media user, operator, and administrator.
5. Click Modify to modify the information of the added ONVIF user.
6. Click Delete to delete the selected ONVIF user.
7. Click to save the settings
6.2 Configuring Video and Audio Settings
6.2.1 Configuring Video Settings
Steps:
1. Enter the Video settings interface:
Configuration > Video/Audio > Video
Figure 6-20 Configure Video Settings
2. Select the Stream Type of the network positioning system to main stream (normal),
sub-stream or third stream. The main stream is usually for recording and live viewing with
good bandwidth, and the sub-stream can be used for live viewing when the bandwidth is
limited. Refer to the Section 4.2 Configuring Local Parameters for switching the main stream
and sub-stream for live viewing.
3. You can customize the following parameters for the selected stream.
The parameters vary depending on different positioning system models.
Video Type:
Select the stream type to video stream, or video & audio composite stream. The audio signal
will be recorded only when the Video Type is Video & Audio.