User Manual

User Manual of Network Positioning System
© Hikvision
5
Network Cable
Network Positioning System
Computer
Figure 2-1 Connecting Directly
网络交换机
Network Cable
Network Cable
or
Network Positioning System
Computer
Figure 2-2 Connecting via a Switch or a Router
2.1.2 Activating the Positioning System
Purpose:
You are required to activate the positioning system first before you can use the positioning
system.
Activation via web browser, activation via SADP, and activation via client software are supported.
 Activation via Web Browser
Steps:
1. Power on the positioning system, and connect it to the network.
2. Input the IP address into the address bar of the web browser, and enter the activation
interface.
The default IP address of the network positioning system is 192.168.1.64.
Figure 2-3 Activation Interface (Web)