User Manual

User Manual of Network Positioning System
© Hikvision
100
should be exactly the same as those of the control device.
About
Click View License, you can check Open Source Software Licenses.
6.4.2 Maintenance
Upgrade & Maintenance
 Rebooting the Network Positioning System
Steps:
1. Enter the Maintenance interface:
2. Configuration > System > Maintenance > Upgrade & Maintenance:
3. Click to reboot the network positioning system.
 Restoring Default Settings
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click or to restore the default settings.
Clicking restores all the parameters to default settings including the IP
address and user information. Use this button with caution.
Figure 6-50 Restore Default Settings
 Exporting Configuration File
Steps:
1. Enter the Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance
2. Click Device Parameters and set the encryption password to export the current
configuration file.
3. Set the saving path to save the configuration file in local storage.
4. Click Diagnose Information to download the log and system information.
 Importing Configuration File
1. Enter the Maintenance interface: