User Manual
Table Of Contents
- About This Document
- Chapter 1 Activating and Accessing to the Camera
- Chapter 2 Setting Local Parameters and Network
- Chapter 3 Live View
- Chapter 4 PTZ Control
- 4.1 Operating PTZ Control
- 4.2 PTZ Configuration
- 4.2.1 Configuring Basic PTZ Parameters
- 4.2.2 Configuring PTZ Limits
- 4.2.3 Configuring Initial Position
- 4.2.4 Configuring Park Action
- 4.2.5 Configuring Privacy Mask for PTZ Camera Channel
- 4.2.6 Configuring Scheduled Tasks
- 4.2.7 Clearing PTZ Configurations
- 4.2.8 Configuring PTZ Control Priority
- 4.2.9 Configuring Panorama Tracking
- 4.2.10 Rapid Focus
- Chapter 5 Storage and Playback
- Chapter 6 Events Settings
- Chapter 7 System Settings
- Appendix
- Appendix 1 SADP Software Introduction
- Appendix 2 Statics, Interference Lightning and Surge Protection
- Appendix 3 Waterproof
- Appendix 4 Bubble Maintenance
- Appendix 5 RS-485 Bus Connection
- Appendix 6 24VAC Wire Gauge & Transmission Distance
- Appendix 7 12VDC Wire Gauge & Transmission Distance
- Appendix 8 Table of Wire Gauge Standards
- Appendix 9 Alarm In/Out Connections
- Appendix 10 Camera Function Description
User Manual of PanoVu Series Network Camera
111
The administrator can add, delete or modify user accounts, and grant them different permissions. We
highly recommend administrator to manage the device accounts and user permissions properly. Up to
31 user accounts can be created.
Administrator need to input correct admin password when changing settings of other operators or
users.
Administrator can set Security Question. Security question is used to reset the forgotten password.
When resetting the forgotten password, the PC the administrator uses and the camera should belong to
the same IP address segment of the same LAN.
As Operator or User
Operator or user can modify password. Old password is required for this action.
Password Recommendation
The system judges the password strength automatically when creating the password. A strong
password is highly recommended to ensure your data security. And a strong password should be your
own choosing (using a minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers, and special characters).
Online User
Enter the Online Users configuration interface:
Configuration > System > User Management > Online Users
Figure 7-17 Online User
You can see the current users who are visiting the device through this interface. User information, such
as user name, level, IP address, and operation time, is displayed in the User List. Click Refresh to refresh
the list.