User Manual

User Manual of PanoVu Series Network Camera
45
Figure 4-2 Calling a Preset
For convenient preset selection, refer to the following steps to navigate to the preset you want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
Note:
The following presets are predefined with special commands. You can only call them but not configure
them. For instance, preset 99 is the “Start auto scan”. If you call the preset 99, the camera starts auto
scan function.
Table 4-1 Special Presets
Preset
Function
Preset
Function
33
Auto flip
93
Save manual limits
34
Back to initial position
94
Remote reboot
35
Call patrol 1
95
Call OSD menu
36
Call patrol 2
96
Stop a scan
37
Call patrol 3
97
Start random scan
38
Call patrol 4
98
Start frame scan
39
Day mode (IR cut filter in)
99
Start auto scan
40
Night mode (IR cut filter out)
100
Start tilt scan
41
Call pattern 1
101
Start panorama scan
42
Call pattern 2
102
Call patrol 5
43
Call pattern 3
103
Call patrol 6
44
Call pattern 4
104
Call patrol 7
45
One-touch patrol
105
Call patrol 8
92
Set manual limits
Figure 4-3 Special Preset