User Manual
Table Of Contents
- About This Document
- Chapter 1 Activating and Accessing to the Camera
- Chapter 2 Setting Local Parameters and Network
- Chapter 3 Live View
- Chapter 4 PTZ Control
- 4.1 Operating PTZ Control
- 4.2 PTZ Configuration
- 4.2.1 Configuring Basic PTZ Parameters
- 4.2.2 Configuring PTZ Limits
- 4.2.3 Configuring Initial Position
- 4.2.4 Configuring Park Action
- 4.2.5 Configuring Privacy Mask
- 4.2.6 Configuring Scheduled Tasks
- 4.2.7 Clearing PTZ Configurations
- 4.2.8 Configuring PTZ Control Priority
- 4.2.9 Configuring Panorama Tracking
- 4.2.10 Rapid Focus
- Chapter 5 Storage and Playback
- Chapter 6 Events Settings
- Chapter 7 System Settings
- Appendix
- Appendix 1 SADP Software Introduction
- Appendix 2 Statics, Interference Lightning and Surge Protection
- Appendix 3 Waterproof
- Appendix 4 Bubble Maintenance
- Appendix 5 RS-485 Bus Connection
- Appendix 6 24VAC Wire Gauge & Transmission Distance
- Appendix 7 12VDC Wire Gauge & Transmission Distance
- Appendix 8 Table of Wire Gauge Standards
- Appendix 9 Alarm In/Out Connections
- Appendix 10 Camera Function Description
User Manual of PanoVu Series Network Camera
37
Other
Lens Initialization
The lens operates the movements for initialization when you check the Lens Initialization checkbox.
Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can be selected from
the list.
Note:
Lens Initialization and Zoom Limit functions are supported by Camera 1 only.
Local Output
Turn on local output, you can output the video to a monitor via analog signal.
3.3.2 Configuring OSD Settings
Purpose:
OSD (On-screen Display) refers to the camera name, time/date, customized information displayed on
the live view.
Note:
This function varies according to different camera models.
Steps:
1. Enter the OSD settings interface:
Configuration > Image > OSD Settings
Figure 3-15 OSD Settings
2. Check the corresponding checkbox to select the display of camera name, date or week if required.
3. Edit the camera name in the text field of Camera Name.
4. Select from the dropdown list to set the time format, date format and display mode.
5. You can use the mouse to drag the text frame IPdome in the live view window to adjust the OSD
position.