User Manual

Table Of Contents
User Manual of PanoVu Series Network Camera
28
Starting Live View
Click on the toolbar to start the live view of all channels of the network camera. Live view page of
panoramic + PTZ camera and panoramic camera are different as shown below.
Figure 3-3 Start Live View (Panoramic + PTZ Camera)
Descriptions of Icons on Toolbar and Live View Interface are listed below:
Live View
/
Click to start all live views and the icon turns into . Click the icon
again to stop all live views.
Full-screen
Double-click on the live video to switch the current live view into
full-screen or return to normal mode from the full-screen.
Record/Capture
Click to manual capture the picture.
/
Click to start manual recording and the icon turns into . Click
the icon again to stop recording.
Note: Before perform manual recording and manual capture, configure the
saving path of files referring to Section 2.1 Local Configuration Interface.
Window Division
For 360° panoramic + PTZ camera, click to select from
and display live video in
triple-row/double-row/1 × 1/2 × 2/ PIP (Picture in Picture)window size.
Stream Type
/ /
Click to select from and display live video with
the main/sub/third stream. The main stream is with a relatively high
resolution and needs much bandwidth. The sub-stream is with a low
resolution and needs less bandwidth. The resolution of third stream is