Operation Manual
Table Of Contents
- About This Document
- Chapter 1 Activating and Accessing to the Camera
- Chapter 2 Setting Local Parameters and Network
- Chapter 3 Live View
- Chapter 4 PTZ Control
- 4.1 Operating PTZ Control
- 4.2 PTZ Configuration
- 4.2.1 Configuring Basic PTZ Parameters
- 4.2.2 Configuring PTZ Limits
- 4.2.3 Configuring Initial Position
- 4.2.4 Configuring Park Action
- 4.2.5 Configuring Privacy Mask
- 4.2.6 Configuring Scheduled Tasks
- 4.2.7 Clearing PTZ Configurations
- 4.2.8 Configuring PTZ Control Priority
- 4.2.9 Configuring Panorama Tracking
- 4.2.10 Configuring Eagle Vision Focus
- Chapter 5 Storage and Playback
- Chapter 6 Alarm and Events
- 6.1 Basic Event Configuration
- 6.2 Smart Event Configuration
- 6.3 VCA Configuration
- Chapter 7 Maintenance
- Appendix
- Appendix 1 SADP Software Introduction
- Appendix 2 Statics, Interference Lightning and Surge Protection
- Appendix 3 Waterproof
- Appendix 4 Bubble Maintenance
- Appendix 5 RS-485 Bus Connection
- Appendix 6 24VAC Wire Gauge & Transmission Distance
- Appendix 7 12VDC Wire Gauge & Transmission Distance
- Appendix 8 Table of Wire Gauge Standards
- Appendix 9 Alarm In/Out Connections
- Appendix 10 Camera Function Description
User Manual of PanoVu Series Network Camera
33
Figure 3-11 Day Night Schedule
Smart Supplement Light
If the light supplement is on and the image center is overexposure, you can enable this function.
IR Light Mode
IR light mode can be set to Auto and Manual.
Auto: The brightness of the infrared light will be adjusted automatically. IR Light
Sensitivity value ranges from 0 to 100. Trigger Mode can be set to Camera or
Photosensitive.
Manual: you need to adjust the brightness value of infrared light manually. Brightness
Limit value ranges from 0 to 100.
Notes:
The IR related functions are supported by the IR camera only.
For detailed parameters configuration of IR light, you can enter the OSD menu by calling the
special preset 95.
When the IR Light Mode is auto, the day/night mode is adjusted automatically according to
the IR Light Mode. Manually setting the day/night mode is invalid.
When the IR Light Mode is manual and the Brightness Limit is 0, you can set the day/night
mode manually.
When the IR Light Mode is manual and the Brightness Limit is not 0, the night mode is set as
the default mode. Manually setting the day/night mode is invalid.
Backlight Settings
BLC (Back Light Compensation)
If there’s a bright backlight, the subject in front of the backlight appears silhouetted or dark.
Enabling BLC (back light compensation) function can correct the exposure of the subject. But the
backlight environment is washed out to white.
WDR (Wide Dynamic Range)
The wide dynamic range (WDR) function helps the camera provide clear images even under back
light circumstances. When there are both very bright and very dark areas simultaneously in the
field of view, WDR balances the brightness level of the whole image and provide clear images with
details.
You can enable or disable the WDR function as shown in Figure 3-12. The wide dynamic level
ranges from 0 to 100.
Figure 3-12 WDR
Note:
This function varies depending on different camera models.
HLC