User Manual

User Manual of PanoVu Series Network Camera
41
Chapter 4 PTZ Control
4.1 Operating PTZ Control
Purpose:
In the live view interface, you can use the PTZ control buttons to control panning, tilting and
zooming. Refer to Section 3.2.2 Live View Operation for detailed information.
4.1.1 Setting/Calling a Preset
Purpose:
A preset is a predefined image position. For the defined preset, you can click the calling button to
quickly view the desired image position.
 Setting a Preset:
Steps:
1. In the PTZ control panel, select a preset number from the preset list.
Figure 4-1 Setting a Preset
2. Use the PTZ control buttons to move the lens to the desired position.
 Pan the camera to the right or left.
 Tilt the camera up or down.
 Zoom in or out.
 Refocus the lens.
3. Click to finish the setting of the current preset.
4. Edit a preset name by double clicking on the default name such as preset 1. (The pre-defined
presets are named already and not configurable. Refer to the user manual for detailed function
description.)
5. You can click to delete the preset.
Note:
You can configure up to 300 presets.
 Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click to call the preset.