Quick Start Guide

PanoVu Series Camera·Quick Start Guide
14
Protective
Foam
Lens Cover
Lower Dome
Back Box
Figure 1-16 Remove the Lower Camera
2. Remove the protective foam, sticker and lens cover from the camera drive. As shown in
Figure 1-17.
Sticker
Figure 1-17 Remove the Sticker
3. Install the micro SD card.
The Micro SD card slot of network camera is shown in Figure 1-18. Insert the matched micro SD
card until the card slot clicks.
Figure 1-18 Micro SD Card Slot
4. Separate the head cover from the camera main body, as shown in Figure 1-19.