User Manual

© Hikvision
Figure 4-12 Patterns Settings Interface
3. Click to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the information of
PROGRAM PATTERN REMAINNING MEMORY (%) is displayed on the screen.
 Pan the camera to the right or left.
 Tilt the camera up or down.
 Zoom in or out.
 Refocus the lens.
5. Click to save all the pattern settings.
 Buttons on the Patterns interface:
Buttons
Description
Start the selected patrol/pattern.
Stop current patrol/pattern.
Set the selected preset/patrol.
Delete the selected preset/patrol/pattern.
Start recording a pattern.
Stop recording the pattern.
Notes:
 These 4 patterns can be operated separately and with no priority level.
 When configuring and calling the pattern, proportional pan is valid; the limit stops and auto
flip will be invalid; and the 3D positioning operation is not supported.
4.6 Playback
Purpose:
This section explains how to view the video files stored in the network disks or memory cards.
Note:
If you are using Google Chrome 57 and its above version or Mozilla Firefox 52 and its above
version, plug-in installation is not compulsory. But Picture and Playback of the camera are not
available. If you want to use the mentioned function, change the web browser to Internet
Explorer, or click to download and install plug-in (only for Windows operation