User Manual

Chapter 12 System and Security
It introduces system maintenance, system sengs and security management, and explains how to
congure relevant parameters.
12.1 View Device Informaon
You can view device informaon, such as Device No., Model, Serial No. and Firmware Version.
Enter Conguraon → System → System Sengs → Basic Informaon to view the device
informaon.
12.2 Restore and Default
Restore and Default helps restore the device parameters to the default sengs.
Steps
1. Go to Conguraon → System → Maintenance → Upgrade & Maintenance .
2. Click Restore or Default according to your needs.
Restore
Reset device parameters, except user informaon, IP parameters and video format
to the default sengs.
Default Reset all the parameters to the factory default.
Note
Be careful when using this funcon. Aer reseng to the factory default, all the
parameters are reset to the default sengs.
12.3 Search and Manage Log
Log helps locate and troubleshoot problems.
Steps
1. Go to Conguraon → System → Maintenance → Log .
2. Set search
condions Major Type, Minor Type, Start Time, and End Time.
3. Click Search.
The matched log
les will be displayed on the log list.
4. Oponal: Click Export to save the log les in your computer.
Network Speed Dome & Posioning System User Manual
87