Network Speed Dome & Positioning System User Manual
Network Speed Dome & Positioning System User Manual Legal Information ©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
Network Speed Dome & Positioning System User Manual PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Network Speed Dome & Positioning System User Manual Contents Chapter 1 Overview .................................................................................................................... 1 1.1 Product Introduction .............................................................................................................. 1 1.2 Key Function .......................................................................................................................... 1 1.3 System Requirement .........
Network Speed Dome & Positioning System User Manual 5.2 Set Preset ............................................................................................................................. 18 5.2.1 Special Presets ............................................................................................................ 18 5.3 Set Patrol Scan ..................................................................................................................... 19 5.3.1 Set One-Touch Patrol ..............
Network Speed Dome & Positioning System User Manual 6.1.9 Count Pixel .................................................................................................................. 30 6.1.10 Light .......................................................................................................................... 30 6.1.11 Operate Wiper .......................................................................................................... 30 6.1.12 Lens Initialization ...........................
Network Speed Dome & Positioning System User Manual 7.4.3 Set Face Tracking ROI .................................................................................................. 39 7.4.4 Set License Plate Tracking ROI ..................................................................................... 40 7.5 Display Info. on Stream ........................................................................................................ 40 7.6 Display Settings ...............................................
Network Speed Dome & Positioning System User Manual 9.1.4 Set Alarm Input ........................................................................................................... 60 9.2 Smart Event .......................................................................................................................... 60 9.2.1 Detect Audio Exception ............................................................................................... 60 9.2.2 Set Intrusion Detection ...........................
Network Speed Dome & Positioning System User Manual 11.5 Access to Device via Domain Name ................................................................................... 79 11.6 Access to Device via PPPoE Dial Up Connection ................................................................ 80 11.7 Accessing via Mobile Client ................................................................................................ 81 11.7.1 Enable Hik-Connect Service on Camera .......................................
Network Speed Dome & Positioning System User Manual 12.12 Set RS-485 ........................................................................................................................ 90 12.13 Security ............................................................................................................................ 91 12.13.1 Authentication ........................................................................................................ 91 12.13.2 Set IP Address Filter ...............
Network Speed Dome & Positioning System User Manual Chapter 1 Overview 1.1 Product Introduction The Network Speed Dome and Network Positioning System are remote monitoring products that integrate the HD camera, PTZ motion control module, and video content analysis algorithms. The device has basic PTZ functions, such as presets, scans, and target tracking, and smart functions, such as Road Traffic, Face Capture and Smart Event.
Network Speed Dome & Positioning System User Manual Recommended Specifications Mac OS 10.13 or later CPU Intel® Pentium® IV 3.0 GHz or higher RAM 1 G or higher Display 1024 × 768 resolution or higher Web Browser Internet Explorer 10 and above version, Apple Safari 12 and above version, Mozilla Firefox 52 and above version, Google Chrome 57 and above version.
Network Speed Dome & Positioning System User Manual Chapter 2 Device Activation and Accessing To protect the security and privacy of the user account and data, you should set a login password to activate the device when access the device via network. Note Refer to the user manual of the software client for the detailed information about the client software activation. 2.1 Activate Device The device need to be activated by setting a strong password before use.
Network Speed Dome & Positioning System User Manual 2.1.2 Activate via SADP SADP is a tool to detect, activate and modify the IP address of the device over the LAN. Before You Start • Get the SADP software from the supplied disk or the official website http:// www.hikvision.com/ , and install the SADP according to the prompts. • The device and the PC that runs the SADP tool should belong to the same subnet. The following steps show how to activate one device and modify its IP address.
Network Speed Dome & Positioning System User Manual 2.2 Access Device via Web Browser Before You Start Check the system requirement to confirm that the operating computer and web browser meets the requirements. See System Requirement . Steps 1. Open the web browser. 2. Input IP address of the device to enter the login interface. 3. Input user name and password. Note Illegal login lock is activated by default.
Network Speed Dome & Positioning System User Manual Operating System Web Browser Operation are restricted. For example, Playback and Picture are not available. For detailed restricted function, refer to the actual device. Note The device only supports Windows and Mac OS system and do not support Linux system. 2.2.2 Admin Password Recovery If you forget the admin password, you can reset the password by clicking Forget Password on the login page after completing the account security settings.
Network Speed Dome & Positioning System User Manual Locking Duration The device releases the lock after the setting duration.
Network Speed Dome & Positioning System User Manual Chapter 3 Face Capture Face capture function detects and captures faces in surveillance scenes. When the grading of the detected face exceeds an algorithm-defined value, the PTZ camera channel captures the face and triggers linkage actions. Set up rule and parameters before using the function. Note • For certain device models, you need to select Face Capture on VCA Resource page first. • This function is only supported by certain device models. 3.
Network Speed Dome & Positioning System User Manual 4. Input Mounting Height of the device. 5. Input or draw the min. pupil distance and the max. pupil distance. The Min. Pupil Distance and the Max. Pupil Distance are used to improve detection accuracy. Only targets whose pupil distance are between the maximum distance and the minimum distance trigger the capture. Click and to draw the distance on live image, or input values in the text fields of Min. Pupil Distance and Max. Pupil Distance. 6. Click Save.
Network Speed Dome & Positioning System User Manual 5) Click Save. 5. Set linkage method. See Linkage Method Settings . 3.2 Operate Manual Face Capture Capture the target face manually in live view image. Steps 1. Click Live View. 2. Click to start manual face capture. 3. Draw a frame to select the target face in live view image. The captured picture can be uploaded to the center. 4. Click the icon again to stop manual face capture. 3.
Network Speed Dome & Positioning System User Manual The content of Device No. and Camera Info should be input on the same page. 3.4 Face Capture Algorithm Parameters It is used to set and optimize the parameters of the algorithm library for face capture. Face Capture Version It refers to the current algorithm version, which cannot be edited. Detection Parameters Generation Speed The speed to identify a target can be set by adjusting the slider, ranging from 1 to 5.
Network Speed Dome & Positioning System User Manual It describes the max. time occupation for one quick shot. Capture Times It refers to the capture times a face will be captured during its stay in the configured area. Unlimited The device keeps capturing the target face, which exceeds the Quick Shot Threshold during the Max. Capture Interval. Limited The device captures the target face according to the set times.
Network Speed Dome & Positioning System User Manual Chapter 4 Road Traffic The device captures the passing vehicles and uploads the vehicle information together with the captured picture. Note • For certain device models, you need to select Road Traffic on VCA Resource page first. • This function is only supported by certain device models. 4.1 Set Vehicle Detection Rule In Vehicle Detection, the device detects and captures the passed vehicles and the license plates.
Network Speed Dome & Positioning System User Manual Detection Mode The device is able to detect vehicles and license plates. With the detection mode settings, the detection priority of the vehicle and license plate can be adjusted on demand. License Plate & Vehicle The vehicle and license plates are detected simultaneously. The device takes a capture either when it detects a vehicle or a license plate. Vehicle Priority The device takes a capture only when it detects a vehicle.
Network Speed Dome & Positioning System User Manual Overlay With Overlay enabled, every uploaded picture has an additional part to display the overlaid information. Font Color The font color of overlaid texts. Background The background color for the overlaid texts. Text Overlay Check the desired item to display on the picture. Display sequence is adjustable. Note • Vehicle Color, Brand, and Type are not supported in this firmware version. • Device No., Camera No., and Camera info.
Network Speed Dome & Positioning System User Manual Chapter 5 PTZ PTZ is an abbreviation for pan, tilt, and zoom. It means the movement options of the camera. 5.1 PTZ Control In live view interface, you can use the PTZ control buttons to control the device panning, tilting, and zooming. PTZ Control Panel Click and hold the directional button to pan/tilt the device. Note • You can set Keyboard Control Speed in Configuration → PTZ → Basic Settings .
Network Speed Dome & Positioning System User Manual Non-motor Vehicle Choose Non-motor Vehicle when you monitor the non-motor vehicles. Motor Vehicle Choose Motor Vehicle when you monitor the motor vehicles. Auto You are recommended to set it as Auto when the application scene of the speed dome is complicated. To avoid blurred image resulted from fast zoom, you can check Enable Proportional Pan in Configuration → PTZ → Basic Settings .
Network Speed Dome & Positioning System User Manual 5.2 Set Preset A preset is a predefined image position. For the defined preset, you can call the preset No. to view the position. Steps 1. Click to show the setting panel, and click . 2. Use the PTZ control buttons to move the lens to the desired position. 3. Select a preset number from the preset list, and click to finish the setting. Note Some presets are predefined with special command. You can only call them but not configure them. 4.
Network Speed Dome & Positioning System User Manual Preset No. Function Preset No. Function 39 Day mode 98 Start frame scan 40 Night mode 99 Start auto scan 41 Call pattern 1 100 Start tilt scan 42 Call pattern 2 101 Start panorama scan 43 Call pattern 3 102 Call patrol 5 44 Call pattern 4 103 Call patrol 6 45 One-touch patrol 104 Call patrol 7 46 Day/Night Mode 105 Call patrol 8 5.3 Set Patrol Scan Patrol scan is a function to automatically move among multiple presets.
Network Speed Dome & Positioning System User Manual Stop patroling. Delete the patrol. Set the patrol. Note You can delete all patrols in Configuration → PTZ → Clear Config . Click Clear All Patrols, and click Save. 5.3.1 Set One-Touch Patrol The device automatically adds presets to one patrol path and starts patrol scan. Steps 1. Set two or more presets among preset No.1 to preset No.32. For setting presets, refer to Set Preset . The device will automatically add presets to patrol path No.8. 2.
Network Speed Dome & Positioning System User Manual Note If you need to delete all the pattern scans, go to Configuration → PTZ → Clear Config , and check Clear All Patterns, and click Save. 5.5 Set Limit The device can only move within the limited range. Steps 1. Go to Configuration → PTZ → Limit . 2. Select Limit Type. Manual Stops It refers to the movement range limit when you control the device manually. Scan Stops It refers to the movement range limit when the device scans automatically.
Network Speed Dome & Positioning System User Manual Call The device moves to the set initial position. Clear Clear the set initial position. 5.7 Set Scheduled Tasks You can set the device to perform a certain task during a certain period. Steps 1. Go to Configuration → PTZ → Scheduled Tasks . 2. Check Enable Scheduled Task. 3. Select the task type and set the period. For setting the period, refer to Set Arming Schedule . 4. Repeat step 3 to set more than one scheduled tasks. 5. Set Park Time.
Network Speed Dome & Positioning System User Manual 5.8.1 Set One-Touch Park This function is used to start park instantly. Steps 1. Refer to Set Park Action to set a park action. 2. Choose from the following methods to start one-touch park. - Click . - Call Preset No. 32. 5.9 Set Privacy Mask Privacy mask enables you to cover certain areas on the live image to prevent certain spots in the surveillance area from being live viewed and recorded. Steps 1. Go to Configuration → PTZ → Privacy Mask . 2.
Network Speed Dome & Positioning System User Manual 3. Set the Duration. The device stops tracking when the duration time is up. 4. Set the zooming control and tracking parameters. Zooming Control Two modes are available. Controlled by target frame or by tilt angle of the device. By Tilt Angle The device calculates the tracking zoom ratio automatically according to the tilt angle of the device. Note The attitude of the device affects the accuracy of this zooming control mode.
Network Speed Dome & Positioning System User Manual Manual Use a direction indicating device to determine the North at the device location, and set the North for the device. For details, see Set Manual Compass . Auto For the device that has built-in e-compass, the compass can automatically tell the north direction for the device. For details, see Set Auto Compass . 3. Click Gyroscope Attitude Calibration to calibrate gyroscope. Note Only devices with built-in gyroscope support this function. 4.
Network Speed Dome & Positioning System User Manual 5.11.2 Set Manual Compass Use a direction indicating device to determine the North at the device location, and set the North for the device. Before You Start Use a direction indicating device to determine the north at the device location. Steps 1. Select the PT Mode as Manual. 2. Adjust the tilt position of the device to 0 by controling the up arrow and down arrow on the PTZ panel. 3.
Network Speed Dome & Positioning System User Manual 3. Click Save. 5.14 Set Rapid Focus Rapid focus is a function to reduce time of focusing comparing with that of normal focusing. To use the function, calibration should be done first. Rapid focus may not be supported by certain camera models. Steps 1. Go to Configuration → PTZ → Rapid Focus . 2. Optional: Check Enable Height Compensation if the mounting height of the device is lower than 3 meters. 3. Select a calibration mode.
Network Speed Dome & Positioning System User Manual Chapter 6 Live View It introduces the live view parameters, function icons and transmission parameters settings. 6.1 Live View Parameters The supported functions vary depending on the model. 6.1.1 Start and Stop Live View Click Live View. Click to start live view. Click to stop live view. 6.1.2 Aspect Ratio Aspect Ratio is the display ratio of the width to height of the image. • • • • • refers to 4:3 window size. refers to 16:9 window size.
Network Speed Dome & Positioning System User Manual 6.1.5 Select the Third-Party Plug-in When the live view cannot display via certain browsers, you can change the plug-in for live view according to the browser. Steps 1. Click Live View. 2. Click to select the plug-in. - When you access the device via Internet Explorer, you can select Webcomponents or QuickTime. - When you access the device via the other browsers, you can select Webcomponents, QuickTime, VLC or MJPEG. 6.1.
Network Speed Dome & Positioning System User Manual 6.1.9 Count Pixel It helps to get the height and width pixel of the selected region in the live view image. Steps 1. Click to enable the function. 2. Drag the mouse on the image to select a desired rectangle area. The width pixel and height pixel are displayed on the bottom of the live view image. 6.1.10 Light Click to turn on or turn off the illuminator. 6.1.11 Operate Wiper For the device that has a wiper, you can control the wiper via web browser.
Network Speed Dome & Positioning System User Manual 6.1.12 Lens Initialization Lens initialization is used on the device equipped with motorized lens. The function can reset lens when long time zoom or focus results in blurred image. This function varies according to different models. Manual Lens Initialization Click to operate lens initialization. Auto Lens Initialization Go to Configuration → System → Maintenance → Lens Correction to enable this function.
Network Speed Dome & Positioning System User Manual 6.2 Set Transmission Parameters The live view image may be displayed abnormally according to the network conditions. In different network environments, you can adjust the transmission parameters to solve the problem. Steps 1. Go to Configuration → Local . 2. Set the transmission parameters as required. Protocol TCP TCP ensures complete delivery of streaming data and better video quality, yet the real-time transmission will be affected.
Network Speed Dome & Positioning System User Manual 6.3 Smart Display This function displays real time images captured by certain smart functions. Note To use this function, you should first enable and configure certain smart functions. • You can view the live image in one or two windows. Click or to switch. • You can choose a live view. Click to choose a live view camera channel to display. • You can change the layout of the display page. Click and check the display content you need to add to the layout.
Network Speed Dome & Positioning System User Manual Chapter 7 Video and Audio This part introduces the configuration of video and audio related parameters. 7.1 Video Settings This part introduces the settings of video parameters, such as, stream type, video encoding, and resolution. Go to setting page: Configuration → Video/Audio → Video . 7.1.1 Stream Type For device supports more than one stream, you can specify parameters for each stream type.
Network Speed Dome & Positioning System User Manual 7.1.4 Bitrate Type and Max. Bitrate Constant Bitrate It means that the stream is compressed and transmitted at a comparatively fixed bitrate. The compression speed is fast, but mosaic may occur on the image. Variable Bitrate It means that the device automatically adjust the bitrate under the set Max. Bitrate. The compression speed is slower than that of the constant bitrate. But it guarantees the image quality of complex scenes. 7.1.
Network Speed Dome & Positioning System User Manual H.264+ H.264+ is an improved compression coding technology based on H.264. By enabling H.264+, you can estimate the HDD consumption by its maximum average bitrate. Compared to H.264, H.264+ reduces storage by up to 50% with the same maximum bitrate in most scenes. When H.264+ is enabled, Max. Average Bitrate is configurable. The device gives a recommended max. average bitrate by default.
Network Speed Dome & Positioning System User Manual 7.1.9 I-Frame Interval I-frame interval defines the number of frames between 2 I-frames. In H.264 and H.265, an I-frame, or intra frame, is a self-contained frame that can be independently decoded without any reference to other images. An I-frame consumes more bits than other frames. Thus, video with more I-frames, in other words, smaller I-frame interval, generates more steady and reliable data bits while requiring more storage space. 7.1.
Network Speed Dome & Positioning System User Manual Audio Input LineIn is supported for external audio pick-up device. Input volume Adjust the volume of the audio input. 7.2.2 Environmental Noise Filter Set it as OFF or ON. When the function is enabled, the noise in the environment can be filtered to some extent. 7.3 Two-way Audio It is used to realize the two-way audio function between the monitoring center and the target in the monitoring screen.
Network Speed Dome & Positioning System User Manual Before You Start Please check the video coding type. ROI is supported when the video coding type is H.264 or H. 265. Steps 1. Go to Configuration → Video/Audio → ROI . 2. Check Enable. 3. Select Stream Type. 4. Select Region No. in Fixed Region to draw ROI region. 1) Click Drawing. 2) Click and drag the mouse on the view screen to draw the fixed region. 3) Click Stop Drawing.
Network Speed Dome & Positioning System User Manual Steps 1. Go to the ROI setting page: Configuration → Video/Audio → ROI . 2. Check Enable Face Tracking. 3. Select ROI Level in Dynamic Region. Note ROI level means the image quality enhancing level. The larger the value is, the better the image quality would be. 4. Click Save. 7.4.
Network Speed Dome & Positioning System User Manual 7.6.1 Scene Mode There are several sets of image parameters predefined for different installation environments. Select a scene according to the actual installation environment to speed up the display settings. Image Adjustment By adjusting the Brightness, Saturation, Contrast and Sharpness, the image can be best displayed. Exposure Settings Exposure is controlled by the combination of iris, shutter, and gain.
Network Speed Dome & Positioning System User Manual Focus Mode Auto The device focuses automatically as the scene changes. If you cannot get a well-focused image under auto mode, reduce light sources in the image and avoid flashing lights. Semi-auto The device focuses once after the PTZ and lens zooming. If the image is clear, the focus does not change when the scene changes. Manual You can adjust the focus manually on the live view page. Min.
Network Speed Dome & Positioning System User Manual 3. Click Save. 4. Go to Configuration → Image → Display Settings → Day/Night Switch to set supplement light parameters. Smart Supplement Light This feature uses smart image processing technology to reduce overexposure caused by supplement light. IR Light Mode When the mode is set to Auto, the supplement light is automatically turned in or off according to the image brightness. Brightness Limit Adjust the upper limit of supplement light power.
Network Speed Dome & Positioning System User Manual DNR Digital Noise Reduction is used to reduce the image noise and improve the image quality. Normal and Expert modes are selectable. Normal Set the DNR level to control the noise reduction degree. The higher level means stronger reduction degree. Expert Set the DNR level for both space DNR and time DNR to control the noise reduction degree. The higher level means stronger reduction degree.
Network Speed Dome & Positioning System User Manual Note For Linked Scene configuration, refer to Scene Mode . 3. Click Save. Set Link to Preset You can set a preset to switch the image to a linked scene. Steps 1. Check Link to Preset. 2. Select a preset. 3. Check and set a time period and a linked scene mode. 4. Click Save. 7.6.3 Mirror When the live view image is the reverse of the actual scene, this function helps to display the image normally. Select the mirror mode as needed.
Network Speed Dome & Positioning System User Manual Character Set Select character set for displayed information. If Korean is required to displayed on screen, select EUC-KR. Otherwise, select GBK. Displayed Information Set camera name, date, week, and their related display format. Text Overlay Set customized overlay text on image. OSD Parameters Set OSD parameters, such as Display Mode, OSD Size, Font Color, and Alignment.
Network Speed Dome & Positioning System User Manual Chapter 8 Video Recording and Picture Capture This part introduces the operations of capturing video clips and snapshots, playback, and downloading captured files. 8.1 Storage Settings This part introduces the configuration of several common storage paths. 8.1.1 Memory Card You can view the capacity, free space, status, type, and property of the memory card. Encryption of memory card is supported to ensure data security.
Network Speed Dome & Positioning System User Manual 5. Optional: Define the Quota of the memory card. Input the percentage for storing different contents according to your needs. 6. Click Save. Set Encrypted Memory Card Before You Start • Insert an encrypted memory card to the device. For detailed installation, refer to Quick Start Guide of the device. • You need to know the correct encryption password of the memory card. Steps 1. Go to Configuration → Storage → Storage Management → HDD Management . 2.
Network Speed Dome & Positioning System User Manual Remaining Lifespan It shows the percentage of the remaining lifespan. The lifespan of a memory card may be influenced by factors such as its capacity and the bitrate. You need to change the memory card if the remaining lifespan is not enough. Health Status It shows the condition of your memory card. There are three status descriptions: good, bad, and damaged.
Network Speed Dome & Positioning System User Manual Before You Start Get the FTP server address first. Steps 1. Go to Configuration → Network → Advanced Settings → FTP . 2. Configure FTP settings. Server Address and Port The FTP server address and corresponding port. User Name and Password The FTP user should have the permission to upload pictures. If the FTP server supports picture uploading by anonymous users, you can check Anonymous to hide your device information during uploading.
Network Speed Dome & Positioning System User Manual The saving path of network disk files. Mounting Type Select file system protocol according to the operation system. Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is selected. 3. Click Test to check whether the network disk is available. 4. Click Save. 8.1.4 Set Cloud Storage It helps to upload the captured pictures and data to the cloud. The platform requests picture directly from the cloud for picture and analysis.
Network Speed Dome & Positioning System User Manual 8.2.1 Record Automatically This function can record video automatically during configured time periods. Before You Start Select Trigger Recording in event settings for each record type except Continuous. See Event and Alarm for details. Steps 1. Go to Configuration → Storage → Schedule Settings → Record Schedule . 2. Check Enable. 3. Select a record type. Note The record type is vary according to different models.
Network Speed Dome & Positioning System User Manual Post-record The time period you set to stop recording after the scheduled time. Stream Type Select the stream type for recording. Note When you select the stream type with higher bitrate, the actual time of the pre-record and post-record may be less than the set value. Recording Expiration The recordings are deleted when they exceed the expired time. The expired time is configurable. Note that once the recordings are deleted, they can not be recovered. 6.
Network Speed Dome & Positioning System User Manual Note Go to Configuration → Local , click Save downloaded files to to change the saving path of downloaded video files. 8.3 Capture Configuration The device can capture the pictures manually or automatically and save them in configured saving path. You can view and download the snapshots. 8.3.1 Capture Automatically This function can capture pictures automatically during configured time periods.
Network Speed Dome & Positioning System User Manual 8.3.3 View and Download Picture You can search, view and download the pictures stored in the local storage or network storage. Steps 1. Click Picture. 2. Set search condition and click Search. The matched pictures showed in the file list. 3. Select the pictures then click Download to download them. Note Go to Configuration → Local , click Save snapshots when playback to change the saving path of pictures.
Network Speed Dome & Positioning System User Manual Chapter 9 Event and Alarm This part introduces the configuration of events. The device takes certain response to triggered alarm. 9.1 Basic Event 9.1.1 Set Motion Detection This function detects moving objects in the detection region and trigger linkage actions. Steps 1. Go to Configuration → Event → Basic Event → Motion Detection . 2. Check Enable Motion Detection. 3.
Network Speed Dome & Positioning System User Manual Figure 9-1 Set Rules Stop Drawing Stop drawing one area. Clear All Clear all the areas. 4. Optional: You can set the parameters of multiple areas by repeating the above steps. Expert Mode You can configure different motion detection parameters for day and night according to the actual needs. Steps 1. Select Expert Mode in Configuration. 2. Set parameters of expert mode. Scheduled Image Settings OFF Image switch is disabled.
Network Speed Dome & Positioning System User Manual 3. Select an Area and click Draw Area. Click and drag the mouse on the live image and then release the mouse to finish drawing one area. Figure 9-2 Set Rules Stop Drawing Finish drawing one area. Clear All Delete all the areas. 4. Click Save. 5. Optional: Repeat above steps to set multiple areas. 9.1.
Network Speed Dome & Positioning System User Manual Figure 9-3 Set Video Tampering Area 5. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 6. Click Save. 9.1.3 Set Exception Alarm Exception such as network disconnection can trigger the device to take corresponding action. Steps 1. Go to Configuration → Event → Basic Event → Exception . 2. Select Exception Type. HDD Full The HDD storage is full. HDD Error Error occurs in HDD.
Network Speed Dome & Positioning System User Manual 9.1.4 Set Alarm Input Alarm signal from the external device triggers the corresponding actions of the current device. Before You Start Make sure the external alarm device is connected. See Quick Start Guide for cables connection. Steps 1. Go to Configuration → Event → Basic Event → Alarm Input . 2. Check Enable Alarm Input Handing. 3. Select Alarm Input NO. and Alarm Type from the dropdown list. Edit the Alarm Name. 4.
Network Speed Dome & Positioning System User Manual Note • The lower the sensitivity is, the more significant the change should be to trigger the detection. • The sound intensity threshold refers to the sound intensity reference for the detection. It is recommended to set as the average sound intensity in the environment. The louder the environment sound, the higher the value should be. You can adjust it according to the real environment.
Network Speed Dome & Positioning System User Manual 2) Click Min. Size, and drag the mouse on the live image. If you want to change the size, click the button and draw again. 7. Set detection parameters. Sensitivity It stands for the sensitivity of detecting an target. The higher the value of sensitivity is, the more easily the target is detected. Threshold Threshold stands for the time of the target loitering in the region.
Network Speed Dome & Positioning System User Manual 4. Adjust the live image to the desired scene by using PTZ control buttons. 5. Draw detection line. 1) Select a Line No.. Up to 4 lines can be set in the scene. 2) Click Detection Area. A yellow line is displayed on live image. 3) Click on the line, and drag its end points to adjust the length and position. 4) Select the Direction for the detection line. Direction It stands for the direction from which the object goes across the line.
Network Speed Dome & Positioning System User Manual Detection You can specify the object type, and the device only detects the selected Target type of objects. 8. Click Save. 9. Repeat above steps to set other lines. 10. Set arming schedule. See Set Arming Schedule . 11. Set linkage method. See Linkage Method Settings . 9.2.4 Set Region Entrance Detection Region entrance detection is used to detect the object movement of entering a predefined area.
Network Speed Dome & Positioning System User Manual Figure 9-6 Draw Area 8. Click Save. 9. Repeat above steps to set other regions. 10. Set arming schedule. See Set Arming Schedule . 11. Set linkage method. See Linkage Method Settings . 9.2.5 Set Region Exiting Detection Region exiting detection is used to detect the objects movement of exiting from a predefined area. When it occurs, the device takes linkage actions as response. Steps 1.
Network Speed Dome & Positioning System User Manual 2) Click Min. Size, and drag the mouse on the live image. If you want to change the size, click the button and draw again. 7. Set detection parameters. Sensitivity It stands for the sensitivity of detecting an target. The higher the value is, the more easily the target is detected. Detection Target You can specify the object type, and the device only detects the selected type of objects. Figure 9-7 Draw Area 8. Click Save. 9.
Network Speed Dome & Positioning System User Manual 2) Click Detection Area. 3) Click on the live image to draw the boundaries of the detection area, and right click to complete drawing. 6. Optional: Set the minimum size and the maximum size for the target to improve detection accuracy. Only targets whose size are between the maximum size and the minimum size trigger the detection. 1) Click Max. Size, and drag the mouse on live image. If you want to change the size, click the button and draw again.
Network Speed Dome & Positioning System User Manual Steps 1. Go to Configuration → Event → Smart Event → Unattended Baggage Detection . 2. Check Enable. 3. Optional: Click Lock to lock PTZ control to prevent the interruption from other PTZ related action during configuration. Normally, the PTZ control is automatically locked when you enter the configuration interface. You can manually resume the lock when the countdown is over. 4. Adjust the live image to the desired scene by using PTZ control buttons. 5.
Network Speed Dome & Positioning System User Manual 10. Set arming schedule. See Set Arming Schedule . 11. Set linkage method. See Linkage Method Settings .
Network Speed Dome & Positioning System User Manual Chapter 10 Arming Schedule and Alarm Linkage Arming schedule is a customized time period in which the device performs certain tasks. Alarm linkage is the response to the detected certain incident or target during the scheduled time. 10.1 Set Arming Schedule Set the valid time of the device tasks. Steps 1. Click Arming Schedule. 2. Drag the time bar to draw desired valid time. Note Up to 8 periods can be configured for one day. 3. Adjust the time period.
Network Speed Dome & Positioning System User Manual Automatic Alarm Set the automatic alarm parameters, then the device triggers an alarm output automatically in the set arming schedule. Steps 1. Set automatic alarm parameters. Alarm Output No. Select the alarm output No. according to the alarm interface connected to the external alarm device. Alarm Name Custom a name for the alarm output. Delay It refers to the time duration that the alarm output remains after an alarm occurs. 2. Set the alarming schedule.
Network Speed Dome & Positioning System User Manual Refer to Set FTP to set the FTP server. Refer to Set NAS for NAS configuration. Refer to Set New or Unencrypted Memory Card for memory card storage configuration. 10.2.3 Send Email Check Send Email, and the device sends an email to the designated addresses with alarm information when an alarm event is detected. For email settings, refer to Set Email .
Network Speed Dome & Positioning System User Manual 10.2.4 Notify Surveillance Center Check Notify Surveillance Center, the alarm information is uploaded to the surveillance center when an alarm event is detected. 10.2.5 Smart Tracking Check Smart Tracking, and the device tracks the target when an alarm event is detected. 10.2.6 Trigger Recording Check Trigger Recording, and the device records the video about the detected alarm event.
Network Speed Dome & Positioning System User Manual Chapter 11 Network Settings 11.1 TCP/IP TCP/IP settings must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting to each other. Go to Configuration → Network → Basic Settings → TCP/IP for parameter settings. NIC Type Select a NIC (Network Interface Card) type according to your network condition. IPv4 Two IPv4 modes are available.
Network Speed Dome & Positioning System User Manual Input IPv6 Address, IPv6 Subnet, IPv6 Default Gateway. Consult the network administrator for required information. MTU It stands for maximum transmission unit. It is the size of the largest protocol data unit that can be communicated in a single network layer transaction. The valid value range of MTU is 1280 to 1500. DNS It stands for domain name server. It is required if you need to visit the device with domain name.
Network Speed Dome & Positioning System User Manual 11.1.2 Multicast Discovery Check the Enable Multicast Discovery, and then the online network camera can be automatically detected by client software via private multicast protocol in the LAN. 11.2 Port The device port can be modified when the device cannot access the network due to port conflicts. Caution Do not modify the default port parameters at will, otherwise the device may be inaccessible.
Network Speed Dome & Positioning System User Manual Note • Enhanced SDK Service Port, WebSocket Port, and WebSockets Port are only supported by certain models. • For device models that support that function, go to Configuration → Network → Advanced Settings → Network Service to enable it. 11.3 Port Mapping By setting port mapping, you can access devices through the specified port.
Network Speed Dome & Positioning System User Manual What to do next Go to the router port mapping settings interface and set the port number and IP address to be the same as those on the device. For more information, refer to the router user manual. 11.3.3 Set Port Mapping on Router The following settings are for a certain router. The settings vary depending on different models of routers. Steps 1. Select the WAN Connection Type. 2.
Network Speed Dome & Positioning System User Manual 11.4 SNMP You can set the SNMP network management protocol to get the alarm event and exception messages in network transmission. Before You Start Before setting the SNMP, you should download the SNMP software and manage to receive the device information via SNMP port. Steps 1. Go to the settings page: Configuration → Network → Advanced Settings → SNMP . 2. Check Enable SNMPv1, Enable SNMP v2c or Enable SNMPv3.
Network Speed Dome & Positioning System User Manual By Browsers Enter the domain name in the browser address bar to access the device. By Client Software Add domain name to the client software. Refer to the client manual for specific adding methods. 11.6 Access to Device via PPPoE Dial Up Connection This device supports the PPPoE auto dial-up function. The device gets a public IP address by ADSL dial-up after the device is connected to a modem. You need to configure the PPPoE parameters of the device.
Network Speed Dome & Positioning System User Manual 11.7 Accessing via Mobile Client Hik-Connect is an application for mobile devices. Using the App, you can view live image, receive alarm notification and so on. Note Hik-Connect service should be supported by the camera. 11.7.1 Enable Hik-Connect Service on Camera Hik-Connect service should be enabled on your camera before using the service. You can enable the service through SADP software or Web browser.
Network Speed Dome & Positioning System User Manual 4. Create a verification code or change the old verification code. Note The verification code is required when you add the camera to Hik-Connect service. 5. Click and read "Terms of Service" and "Privacy Policy". 6. Confirm the settings. 11.7.2 Set Up Hik-Connect Steps 1. Get and install Hik-Connect application by the following ways. - Visit https://appstore.hikvision.com to download the application according to your mobile phone system.
Network Speed Dome & Positioning System User Manual Note • The required verification code is the code you create or change when you enable Hik-Connect service on the camera. • If you forget the verification code, you can check the current verification code on Platform Access configuration page via web browser. 6. Tap Connect to a Network button in the popup interface. 7. Choose Wired Connection or Wireless Connection according to your camera function.
Network Speed Dome & Positioning System User Manual 3. Click Add to configure the Open Network Video Interface user. Delete Delete the selected Open Network Video Interface user. Modify Modify the selected Open Network Video Interface user. 4. Click Save. 5. Optional: Repeat the steps above to add more Open Network Video Interface users. 11.10 Set Network Service You can control the ON/OFF status of certain protocol as desired. Steps Note This function varies according to different models. 1.
Network Speed Dome & Positioning System User Manual Note • Complete certificate management before selecting server certificate. Refer to Certificate Management for detailed information. • When set up connection between the device and the client software, it is recommended to use Enhanced SDK Service and set the communication in Arming Mode to encrypt the data transmission. See the user manual of the client software for the arming mode settings. TLS (Transport Layer Security) The device offers TLS1.
Network Speed Dome & Positioning System User Manual It helps to improve latency and reduce packet loss caused by network congestion and ensure the video quality as well. Shaping level is configurable. 11.14 Set SRTP The Secure Real-time Transport Protocol (SRTP) is a Real-time Transport Protocol (RTP) internet protocol, intended to provide encryption, message authentication and integrity, and replay attack protection to the RTP data in both unicast and multicast applications. Steps 1.
Network Speed Dome & Positioning System User Manual Chapter 12 System and Security It introduces system maintenance, system settings and security management, and explains how to configure relevant parameters. 12.1 View Device Information You can view device information, such as Device No., Model, Serial No. and Firmware Version. Enter Configuration → System → System Settings → Basic Information to view the device information. 12.
Network Speed Dome & Positioning System User Manual 12.4 Import and Export Configuration File It helps speed up batch configuration on other devices with the same parameters. Steps 1. Export configuration file. 1) Go to Configuration → System → Maintenance → Upgrade & Maintenance . 2) Click Device Parameters and input the encryption password to export the current configuration file. 3) Set the saving path to save the configuration file in local computer. 2. Import configuration file.
Network Speed Dome & Positioning System User Manual Firmware Directory Locate the directory which the upgrade file belongs to. 3. Click Browse to select the upgrade file. 4. Click Upgrade. 12.8 eMMC Protection It is to automatically stop the use of eMMC as a storage media when its health status is poor. Note The eMMC protection is only supported by certain device models with an eMMC hardware. Go to Configuration → System → Maintenance → System Service for the settings.
Network Speed Dome & Positioning System User Manual 4. Choose one time synchronization method. - Select Set Time, and manually input or select date and time from the pop-up calendar. - Check Sync. with computer time to synchronize the time of the device with that of the local PC. 5. Click Save. 12.11.2 Set NTP Server You can use NTP server when accurate and reliable time source is required. Before You Start Set up a NTP server or obtain NTP server information. Steps 1.
Network Speed Dome & Positioning System User Manual Steps 1. Go to Configuration → System → System Settings → RS-485 . 2. Set the RS-485 parameters. Note You should keep the parameters of the device and the computer or terminal all the same. 3. Click Save. 12.13 Security You can improve system security by setting security parameters. 12.13.1 Authentication You can improve network access security by setting RTSP and WEB authentication.
Network Speed Dome & Positioning System User Manual 12.13.2 Set IP Address Filter IP address filter is a tool for access control. You can enable the IP address filter to allow or forbid the visits from the certain IP addresses. IP address refers to IPv4. Steps 1. Go to Configuration → System → Security → IP Address Filter . 2. Check Enable IP Address Filter. 3. Select the type of IP address filter. Forbidden IP addresses in the list cannot access the device.
Network Speed Dome & Positioning System User Manual 12.13.4 Security Audit Log The security audit logs refer to the security operation logs. You can search and analyze the security log files of the device so as to find out the illegal intrusion and troubleshoot the security events. Security audit logs can be saved on device internal storage. The log will be saved every half hour after device booting. Due to limited storage space, you can also save the logs on a log server.
Network Speed Dome & Positioning System User Manual 12.13.5 Set QoS QoS (Quality of Service) can help improve the network delay and network congestion by setting the priority of data sending. Note QoS needs support from network device such as router and switch. Steps 1. Go to Configuration → Network → Advanced Configuration → QoS . 2. Set Video/Audio DSCP, Alarm DSCP and Management DSCP. Note Network can identify the priority of data transmission. The bigger the DSCP value is, the higher the priority is.
Network Speed Dome & Positioning System User Manual 12.13.8 Control Timeout Settings If this function is enabled, you will be logged out when you make no operation (not including viewing live image) to the device via web browser within the set timeout period. Go to Configuration → System → Security → Advanced Security to complete settings. 12.13.9 Certificate Management It manages the server/client certificates and CA certificate of the device.
Network Speed Dome & Positioning System User Manual 2. 3. 4. 5. Select a self-signed certificate from the Server/Client Certificate list. Click Create Certificate Request. Input request information. Click OK. The certificate request details are displayed in a pop-up window. 6. Copy the request content and save it as a request file. 7. Send the file to a trusted-third party for signature. 8. After receiving the certificated sent back from the third-party, install it to the device. 1) Click Import.
Network Speed Dome & Positioning System User Manual The imported certificate is displayed in the Server/Client Certificate list. If the certificate is used by certain function, the function name is shown in the column Functions. Install CA Certificate Before You Start Prepare a CA certificate in advance. Steps 1. Go to Configuration → System → Security → Certificate Management . 2. Input Certificate ID. Note The input certificate ID cannot be the same as the existing ones. 3.
Network Speed Dome & Positioning System User Manual The administrator has the authority to all operations and can add users and operators and assign permission. User Users can be assigned permission of viewing live video, setting PTZ parameters, and changing their own passwords, but no permission for other operations. Operator Operators can be assigned all permission except for operations on the administrator and creating accounts.
Network Speed Dome & Positioning System User Manual Appendix A. Device Command Scan the following QR code to get device common serial port commands. Note that the command list contains the commonly used serial port commands for all Hikvision network cameras.
Network Speed Dome & Positioning System User Manual Appendix B. Device Communication Matrix Scan the following QR code to get device communication matrix. Note that the matrix contains all communication ports of Hikvision network cameras.
UD21058B
