Quick Start Guide

Network Speed Dome·Quick Start Guide
30
Wall mounting bracket
Wall mounting bracket +
corner mounting bracket
Wall mounting bracket +
vertical pole mounting
bracket
Figure 2-47 Brackets for Installation
 For cement wall, you need to use the expansion screw to fix the bracket. The
mounting hole of the expansion pipe on the wall should align with the mounting
hole on the bracket.
 For wooden wall, you can just use the self-tapping screw to fix the bracket.
 Make sure that the wall is strong enough to withstand more than eight times the
weight of the speed dome and the accessories.
 If you use the brackets the dealer recommends, the pendant adapter in the package
is not needed during installation. The included pendent adapter might be useful if
you use other brackets. The dimension of pendant adapter is G1
1
2
.
Figure 2-48 Supplied Pendant Adapter
Steps:
1. Route the cables and install the brackets.
2. Fix the head cover to the wall mounting bracket.
1). Apply thread tape to the thread of the head cover and rotate the head cover to
the bracket.
2). Tighten the lock screws.