Quick Start Guide

Network Speed DomeยทQuick Start Guide
7
3. If the speed dome supports PoE (Power over Ethernet) function, you can switch the
PoE+ and Hi-PoE function for the speed dome. If PoE function is not supported, skip
this step.
1
2
ON
Figure 2-5 PoE+ and Hi-PoE Switch
Note:
If you choose Hi-PoE, a Hi-PoE adapter must be connected. The Hi-PoE module
connection is shown in Figure 2-6.
1
2
3 4
Network Speed Dome
Ethernet
1: Power Indicator
2: PORT Indicator
3: DATA & POWER OUT
4: DATA IN
Figure 2-6 Hi-PoE Connection
Connecting Hi-PoE
Steps:
1) Connect the Hi-PoE module to the Internet via the DATA IN interface with a
network cable.
2) Connect the Hi-PoE module to the speed dome via the DATA & POWER OUT
interface with a network cable.
3) Power on the Hi-PoE module.
4. Install the memory card.
5. Align the cuts on the bubble with the lock screws on the back box to reinstall the
bubble. Tighten the lock screws.