User's Manual

5.2 Operate Manual Face Capture
Capture the target face manually in live view image.
Steps
1. Click Live View.
2. Click to start manual face capture.
3. Dra
w a frame to select the target face in live view image.
The captured picture can be uploaded to the center.
4. Click the icon again to stop manual face capture.
5.3 Overlay and Capture
Choose to congure capture parameters and the informaon you want to display on stream and
picture.
Displa
y on Stream
Display smart informaon on stream, including the target and rules informaon.
Display on Picture
Overla
y the alarm picture with target informaon.
Target Picture Sengs
You can set the face picture type by selecng Custom, Head Shot, Half
-Body Shot, or Full-Body
Shot. If you select Custom, you can dene detailed picture width and height of a picture freely.
If the captured pictures should have the same picture height, check Fixed Value and input
desired picture height.
Background Picture Sengs
Comparing to target picture, background picture is the scene image oers extra environmental
informaon. You can set the background picture quality and resoluon. If the background image
need to be uploaded t
o surveillance center, check Background Upload.
Camera Informaon
Enter Device No. and Camera Info in order to manage the monitoring device.
T
ext Overlay
You can check desired items and adjust their order to display on captured pictures by clicking
.
5.4 Face Capture Algorithm Parameters
It is used to set and opmize the parameters of the algorithm library for face capture.
F
ace Cap
ture Version
Network Speed Dome User Manual
25