User's Manual

Tuning Mode
The mode is only for the professional users.
Tracking Capture
Check to enable the device to capture the targets during the tracking.
Some capture parameters are allowed to adjust.
Face Capture Threshold
It refers for the quality of face to trigger capture and alarm. Higher value means beer quality
should be met to trigger capture and alarm.
Human Body Capture Threshold
It refers for the quality of human body to trigger capture and alarm. Higher value means beer
quality should be met to trigger capture and alarm.
Tracking Parameters
Zooming Control
Two modes are available. Controlled by target frame or by lt angle of the device.
By Tilt Angle
The device calculates the tracking zoom rao automacally according to the lt angle of the
device.
Note
The atude of the de
vice aects the accuracy of this zooming control mode. For the model
with a built-in gyroscope, try to calibrate the atude if some zooming problems happen
during tracking. See Set Device Posion for instrucons.
By Target Frame
The track
ed target has a virtual frame around. The device calculates a suitable zoom rao
according to the frame and the set Tr
acking Zoom Rao. Larger value means bigger zoom
rao.
Dwell Time aer Failed Tracking
The me the device stays at the posion where the target tracking fails.
Report Interval of Tracking Info
The alarming informaon upload interval during tracking.
Wait t
o Stop Tracking If Low Validity
The validity is an internal parameter that helps judge whether the device should keep tracking
or not. This parameter is the waing me level before the device stops tracking when the
validity is low. Larger value means longer waing me.
Wait to Lower Tracking Speed If Low Validity
Network Speed Dome User Manual
15