User's Manual

Go to Smart Display to see currently captured target pictures.
3.3.2 Overlay and Capture
Choose to congure capture parameters and the informaon you want to display on stream and
picture.
Display on Stream
Display smart informaon on stream, including the target and rules informaon.
Display on Picture
Overlay the alarm picture with target informaon.
Target Picture Sengs
You can set the face picture type by selecng Custom, Head Shot, Half-Body Shot, or Full-Body
Shot. If you select Custom, you can dene detailed picture width and height of a picture freely.
If the captured pictures should have the same picture height, check Fixed Value and input
desired picture height.
Background Picture Sengs
Comparing to target picture, background picture is the scene image oers extra environmental
informaon. You can set the background picture quality and resoluon. If the background image
need to be uploaded t
o surveillance center, check Background Upload.
Text Overlay
You can check desired items and adjust their order to display on captured pictures by clicking
.
3.3.3 Mul-Target-Type Detecon Algorithm Parameters
It is used to set and opmize the parameters of the algorithm library for Mul-Target-Type
Det
econ.
HMS Version
It re
fers to the current algorithm version, which cannot be edited.
Restore Default
Click Restore to restore all the sengs in advanced conguraon to the factory default.
Detecon Parameters
Generaon Speed
The speed to idenfy a target can be set by adjusng the slider, ranging from 1 to 5. The higher
the value is, the faster the target will be recognized. The default value is recommended.
Sensivity
Network Speed Dome User Manual
13