User's Manual

14.12.5 Set QoS
QoS (Quality of Service) can help improve the network delay and network congeson by seng
the priority of data sending.
Note
QoS needs support from network device such as router and switch.
Steps
1. Go to Con
guraon → Network → Advanced Conguraon → QoS .
2. Set Video/Audio DSCP, Alarm DSCP and Management DSCP.
Note
Network can idenfy the priority of data transmission. The bigger the DSCP value is, the higher
the priority is. You need t
o set the same value in router while conguraon.
3. Click Save.
14.12.6 Se
t IEEE 802.1X
You can authencate user permission of the connected device by seng IEEE 802.1X.
Go to Conguraon → Network → Advanced Sengs → 802.1X , and enable the funcon.
Select protocol and version according to router informaon. User name and password of server are
required.
Note
• If you set the Pr
ot
ocol to EAP-TLS, select the Client Cercate and CA Cercate.
• If the funcon is abnormal, check if the selected cercate is abnormal in Cercate
Management.
14.12.7 SSH
Secure Shell (SSH) is a cryptographic network protocol for operang network services over an
unsecur
ed ne
twork.
The SSH funcon is disabled by default.
Cauon
Use the funcon with cauon. The security risk of device internal informaon leakage exists when
the funcon is enabled.
Network Speed Dome User Manual
108